Paul (Notts)
|
| posted on 20/4/08 at 10:23 AM |
|
|
RV8 air filter - what size
Umm...
I currently have a filter that is very small in height - under 2 inches, and Think that its restricting the air flow a little.
What have other people fitted ?
I am thinking of swapping it for a K&N 14 inch by 3 inch, but not sure about clearance issues with bonnet.
Thanks
Paul
last job before Stoneleigh ( I hope )
|
|
|
|
|
Simon
|
| posted on 20/4/08 at 03:10 PM |
|
|
Paul,
If it (3" ) you could always cut a hole in the bonnet.
Guaranteed air flow then
I'm using two Imprezza turbo filters. About a tenner each from Halfords!
ATB
Simon
[Edited on 20/4/08 by Simon]
|
|
|
Paul (Notts)
|
| posted on 20/4/08 at 03:30 PM |
|
|
Just had a good look - a 3 inch filter should fit without any probs .
Now to find a cheep source.
Paul
|
|
|
simonk
|
| posted on 9/5/08 at 03:15 PM |
|
|
Have you found anything yet ? I've a brand new standard Edelbrock 3" filter that I won't be using. U2U me if interested.
Thanks
Simon
|
|
|
Paul (Notts)
|
| posted on 9/5/08 at 03:44 PM |
|
|
Thanks... but alreadt fitted a 3inch K&N
Made a big difference
Paul
|
|
|
simonk
|
| posted on 9/5/08 at 03:57 PM |
|
|
I've got a very small filter to go under the bonnet for SVA as the leveling plate and heatsinks that I have under the carb push the filter very
high. Once SVA passed I will cut the bonnet for the triangular filter that I have to stick out. If you look at the third pic in my archive you will
see what I mean !
Cheers
Simon
|
|
|
