Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Ride height and suspension settings
richwill

posted on 17/9/08 at 01:14 PM Reply With Quote
Ride height and suspension settings

i am trying to set up the velocity and would like some guidance on initial settings for ride height etc. Could someone give me an account of how to set this up. Where do i measure the ride height from.
View User's Profile View All Posts By User U2U Member
Steve Lovelock

posted on 17/9/08 at 07:54 PM Reply With Quote
I am afraid to say that I just did the nuts up on the shocks so that there was some tension there and stuck them on. I never measured it. In fact I never measured anything, the tracking, caster, camber etc. I always planned to go and get the whole lot set up professionally but it still drives fantastically. I did 300 miles at the weekend and it handled like a dream. So basically I am no help, can't even think why I bothered to reply.

Good luck.
Steve

View User's Profile View All Posts By User U2U Member
rusty nuts

posted on 18/9/08 at 05:50 PM Reply With Quote
Don't know if it was correct but when I set mine up I measured from the chassis below the wishbone mounting brackets for the front and rear suspension . After it had been on the road for a year or so I set it up using a corner weight gauge which made a noticeable difference
View User's Profile View All Posts By User U2U Member
wilkingj

posted on 27/9/08 at 09:54 AM Reply With Quote
quote:
Originally posted by Steve Lovelock
I am afraid to say that I just did the nuts up on the shocks so that there was some tension there and stuck them on. I never measured it. In fact I never measured anything, the tracking, caster, camber etc. I always planned to go and get the whole lot set up professionally but it still drives fantastically. I did 300 miles at the weekend and it handled like a dream. So basically I am no help, can't even think why I bothered to reply.
Good luck.
Steve

I would still get it set up, or at least checked.
If its wrong, you will get tyre wear, which will cost you money.

Also in the event of an accident, and the insurance find out, they will reduce any claim, as you are partly to blame for not setting the car up (if you built it).

IMHO, its peace of mind, that you know its corretly set up.

Finally, these cars handle very well indeed anyway. However, if you have never driven one before, you will come to realise that they can handle even better if correctly set up.

The Lastly... If its your first 7, and you are new to driving it. Take a lot of care to learn how your car drives and its capabilities. (Especially with damper / greasier road conditions coming in the Autumn)
Take it steady to start with... too many people on here have trashed a years worth of hard work, by not learning how to drive their car properly, and what its limitations are.

Have fun, but do take care.






1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.

Best Regards
Geoff
http://www.v8viento.co.uk

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.