WestfieldSEI
|
| posted on 25/7/09 at 07:11 AM |
|
|
FS: Some more bits and bobs
Some odds and sods found around the garage, might be useful to someone out there.........
5 unused 2" diameter wheel centre caps in silver plastic. £5 inc P&P
Three (?) Ford wheel nuts for alloys M12*1.5 thread. £3 inc P&P
8 M12*1.5 wheel studs. 1.125" long. These came off Ford Cortina hubs. SOLD!
8 M12*1.5 wheel nuts. Chrome plated, a little rusty. Not sure what wheels these fit...
£5 inc P&P
14 (?) Used Taper washers 1" external diameter, 3/4" internal diameter.
£2 including P&P
1 pair of new track rod end covers suitable for SVA/IVA. £4 inc P&P
Drop me a pm....
[Edited on 25/7/09 by WestfieldSEI]SOLD!
[Edited on 27/7/09 by WestfieldSEI]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
madrallysport
|
| posted on 25/7/09 at 07:22 AM |
|
|
u2u sent, re wheel studs
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
WestfieldSEI
|
| posted on 25/7/09 at 07:57 AM |
|
|
replied
|
|
|
matt_gsxr
|
| posted on 25/7/09 at 08:47 AM |
|
|
FYI
Those 8 wheelnuts look like the ones I have on my Compomotive/Revolutions. Mine have flat washers on them.
If they are for Ford then the thread should be M12 1.5mm.
Matt
|
|
|
WestfieldSEI
|
| posted on 25/7/09 at 09:01 AM |
|
|
Its too early in the morning! Just checked again and they are M12 * 1.5 thread pitch.
Ad has been edited... What a prat
|
|
|
WestfieldSEI
|
| posted on 27/7/09 at 07:25 AM |
|
|
Wheel Studs now sold! Thanks.
|
|
|
WestfieldSEI
|
| posted on 5/9/09 at 04:22 PM |
|
|
Bump!
|
|
|
prawnabie
|
| posted on 5/9/09 at 04:27 PM |
|
|
u2u sent re wheel cappings
|
|
|
prawnabie
|
| posted on 5/9/09 at 04:28 PM |
|
|
u2u sent re wheel cappings
|
|
|
WestfieldSEI
|
| posted on 6/9/09 at 07:58 PM |
|
|
U2U replied to.
|
|
|
