james h
|
posted on 26/3/10 at 07:33 PM |
|
|
DIY quickshift?
Has anybody on here tried making their own quickshift?
As far as I can see the power to the coils is cut by a microswitch when it senses a movement in the gear lever/paddles, shouldn't be that hard
to make, surely?
If anyone has any thoughts on the matter I would be grateful to hear them.
James
|
|
|
MakeEverything
|
posted on 26/3/10 at 08:22 PM |
|
|
quote: Originally posted by james h
Has anybody on here tried making their own quickshift?
As far as I can see the power to the coils is cut by a microswitch when it senses a movement in the gear lever/paddles, shouldn't be that hard
to make, surely?
If anyone has any thoughts on the matter I would be grateful to hear them.
James
They already exist for bikes. just copy the design.
If i had a BEC, id also have electronic paddle shift with it, using two solenoids connected to spherical bearings via adjustable rods.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
g.gilo
|
posted on 26/3/10 at 11:30 PM |
|
|
elec shift
finding neutral is the problem using soleniods and switches, its a half step between 1st and 2nd gear?
|
|
james h
|
posted on 27/3/10 at 12:00 AM |
|
|
I am not intending to use solenoids just yet, but I was wondering more about the switch/wiring used to kill power to the coils, and whether its
something one could do on a locost budget.
|
|
cloudy
|
posted on 27/3/10 at 12:04 AM |
|
|
Yeah, I made my own, worked a treat - I used a PIC to fire a transistor to interupt coil power with an adjustable period
James
www.warnercars.com
|
|