FlansS14
|
posted on 7/5/10 at 02:08 PM |
|
|
Audi V8
Ive been looking into audi V8 engines for a while and found this link. There is allot of info on there. It seames there are quite a few
aplications?
has anyone fitted the Audi lump on an aftermarket ecu?
link
http://www.ozaudi.com/forums/showthread.php?t=22760
Why didn't i just make it simple!
|
|
|
scootz
|
posted on 7/5/10 at 02:32 PM |
|
|
Which V8 were you thinking off? B7 (FSI) or earlier?
It's Evolution Baby!
|
|
ashg
|
posted on 7/5/10 at 02:34 PM |
|
|
think scootz had a play with an rs4 engine
doh too slow
[Edited on 7/5/10 by ashg]
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
FlansS14
|
posted on 7/5/10 at 03:16 PM |
|
|
quote: Originally posted by scootz
Which V8 were you thinking off? B7 (FSI) or earlier?
Probably the earlier 4.2 32v AHC only because there is no vvt or FSI and would be easier to run on an aftermarket ecu.
it seams the FSI is very hard to control? and the cam driven pumps lift the fuel pressure to between 30 and 100 bar
Why didn't i just make it simple!
|
|
scootz
|
posted on 7/5/10 at 03:52 PM |
|
|
Yep... much easier to stick with the earlier engines.
Most aftermarket ecu's will control the non-FSI engine.
This is a good thread on Motorgeek... Hilly's Audi Esprit
It's Evolution Baby!
|
|
FlansS14
|
posted on 7/5/10 at 04:14 PM |
|
|
ohhhhh very cool...
now im tempted
either...
Audi UR Quattro with this lump
Lotus Esprit (after seeing this)
or Classic Tvr ?
hmmmmm
Why didn't i just make it simple!
|
|
FlansS14
|
posted on 7/5/10 at 05:12 PM |
|
|
just reading Hilly's Esprit thread!!!!
SHIT THE BED!! that man has skills!!!
Why didn't i just make it simple!
|
|
scootz
|
posted on 7/5/10 at 05:19 PM |
|
|
Quite impressive, eh!?
It's Evolution Baby!
|
|
FlansS14
|
posted on 7/5/10 at 07:16 PM |
|
|
Very!
So what were u planning to do with your direct injectors? Did u plug them. Also is there not a crank pos sensor on them. I see he had to make one?
Why didn't i just make it simple!
|
|
scootz
|
posted on 7/5/10 at 07:48 PM |
|
|
Yeah... I plugged mine and had a set of throttle body manifolds made.
It's Evolution Baby!
|
|
crafty
|
posted on 23/5/10 at 11:54 PM |
|
|
I'm in the process of shoving an Audi S5 engine up the bum of a Porsche 356....
more info here
I'd be very interested to hear more about your FSI to ITB conversion.
Who made the ITB setup?
What ECU are you running?
Ultima GTR - 600hp Magnacharged LS2
MNR Vortx - Supercharged R1
Porsche 356 - midmounted Audi V8
|
|