Thinking about it
|
| posted on 23/8/10 at 01:57 PM |
|
|
Aluminium sheet prices
Can anyone give a guide price for aluminium sheet 1.2mm. So I know who is pulling my chain when I phone round for some prices.
What grade am I looking for for internal panelling?
|
|
|
|
|
doddy
|
| posted on 23/8/10 at 02:04 PM |
|
|
this is one of the cheapest i have found most want a lot to post so your better if you can pick up
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=270317743281&ssPageName=STRK:MEWAX:IT
[Edited on 23/8/10 by doddy]
|
|
|
theconrodkid
|
| posted on 23/8/10 at 02:09 PM |
|
|
i have a sheet 49" X 49" of 1.5mm,£20 if ya want,near heathrow airport tho
u2u me if ya want it
who cares who wins
pass the pork pies
|
|
|
rb968
|
| posted on 23/8/10 at 03:41 PM |
|
|
I paid £45 per 8x4 sheet for 1.2mm locally about 4 months ago.
Rich
|
|
|
hicost blade
|
| posted on 23/8/10 at 04:05 PM |
|
|
I paid £65 for a 6 x 4' sheet of 1.2mm NS4.....
NS4 is the one to use btw
|
|
|
scootz
|
| posted on 23/8/10 at 04:08 PM |
|
|
I have a sheet of 2mm at 2m x 4m lying around... it was going to form the one-piece flat-floor for the Ultima, but is now surplus to requirements!
I'm happy to take cuts off of it if anyone needs any!
It's Evolution Baby!
|
|
|
2cv
|
| posted on 23/8/10 at 04:36 PM |
|
|
As said, use NS4 which is a very tough alloy. 1.2mm for floor and bulkheads etc. Price range would be £45 to £50 plus VAT for an 8 x 4 or metric
equivalent sheet. Where any forming is needed such as, for example, the scuttle or bonnet, pure aluminium 1050A, or NS3 are good to work with.
|
|
|
Mark Allanson
|
| posted on 23/8/10 at 08:55 PM |
|
|
quote:
Originally posted by theconrodkid
i have a sheet 49" X 49" of 1.5mm,£20 if ya want,near heathrow airport tho
u2u me if ya want it
It has either Easyjet or Virgin stickers on it though!
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
Michael
|
| posted on 24/8/10 at 08:19 PM |
|
|
You tried Aalco?
I found them quite reasonable, and have brought steel, ali sheet and aluminium moulding.
|
|
|
