Miks15
|
posted on 6/12/10 at 03:01 PM |
|
|
Model airplane diesel two stroke engines
Hi Guys,
My design project at uni this year is to design a two stroke compression ignition engine for a model airplane capable of producing 0.06BHP at 12000
RPM.
I am looking to find different specifications of different engines already on the market to help with my decisions of bore/stroke ratio, compression
ratio, capacity, displacement etc.
Does anyone know anything or know when i can find any general information with regards to this?
Cheers
Mikkel
|
|
|
scudderfish
|
posted on 6/12/10 at 03:16 PM |
|
|
Drop these guys a line. http://www.eifflaender.com/ They make some cracking little engines.
|
|
CNHSS1
|
posted on 6/12/10 at 03:17 PM |
|
|
Try speaking to PAW (Progress Aero Works) who are/were a UK manufacturer of many years of diesels.
also if you can get hold of him, Ken Morrisey from Irvine engines is a mind of useless info on diesels and ex brit and world champion.
as im sure you are aware, glow plug motors are semi compression ignition motors too, iev known them run with blown plug elements purely on the
compression, albeit a bit off tune.
another vital firm to speak to is Model Technics in shoeburyness, they are the UKs biggest fuel blender and will give you the low down on fuel specs,
which are of course linked to the desired output of your motor project. Often the racier fuels require the carb/Compression settings to be near spot
on, whereas their Easy Start fuels the settings can be a fair bit off and the thing will still fire up (usually back firing and whacking the hell
outta ya finger!)
CNH
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
Canada EH!
|
posted on 6/12/10 at 03:17 PM |
|
|
I haven't seen a diesel R/C engine for some years, they were mostly available in Europe, easily distinguished from Nitro engines as there is a
wing nut on the top of the cylinder head to raise and lower the compression for starting and running, tuning.
Have a look on ebay or at hobby shops that have been in business for some time.
|
|
scudderfish
|
posted on 6/12/10 at 03:23 PM |
|
|
quote: Originally posted by CNHSS1
Try speaking to PAW (Progress Aero Works) who are/were a UK manufacturer of many years of diesels.
That's who I linked to
|
|
prawnabie
|
posted on 6/12/10 at 03:34 PM |
|
|
Ive seen a few diesel conversions on nitro engines at my local R/C club.
|
|
Miks15
|
posted on 6/12/10 at 03:42 PM |
|
|
Cheers for all the info guys,
Will try get in touch with them
|
|
CNHSS1
|
posted on 6/12/10 at 03:51 PM |
|
|
quote: Originally posted by scudderfish
quote: Originally posted by CNHSS1
Try speaking to PAW (Progress Aero Works) who are/were a UK manufacturer of many years of diesels.
That's who I linked to
yes but i was writing my comprehensive reply whilst you added youre link
I remember seeing Paul E, son of Gig, flying in control line aerobatics at Three Sisters in mid to late 80s, very handy pilot too.
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
BenB
|
posted on 6/12/10 at 04:37 PM |
|
|
quote: Originally posted by prawnabie
Ive seen a few diesel conversions on nitro engines at my local R/C club.
Have a look at Davis Diesels in the states, they do conversion kits
Diesel smells though....
|
|
scudderfish
|
posted on 6/12/10 at 06:32 PM |
|
|
quote: Originally posted by BenB
quote: Originally posted by prawnabie
Ive seen a few diesel conversions on nitro engines at my local R/C club.
Have a look at Davis Diesels in the states, they do conversion kits
Diesel smells though....
Model Diesel engines smell so much nicer than glow engines
|
|
andrew-theasby
|
posted on 6/12/10 at 07:15 PM |
|
|
not sure on the power of it but i have some plans for a 0.1cc diesel that i started building as an apprentice. send me your email if you want a copy
|
|
keith2lp
|
posted on 6/12/10 at 07:52 PM |
|
|
Diesel Engine
Have a look here.
http://www.hemingwaykits.com/acatalog/The_Sparey_5cc_Engine___L_W_Sparey.html
|
|
Dingz
|
posted on 6/12/10 at 11:27 PM |
|
|
quote:
Try speaking to PAW (Progress Aero Works) who are/were a UK manufacturer of many years of diesels.
Wow thats a flash back! used to have a PAW and a Webra for combat planes many years ago. Still got the Webra dunno what happened to the PAW tho'
Phoned the local ramblers club today, but the bloke who answered just
went on and on.
|
|