beaver34
|
posted on 7/7/11 at 09:55 PM |
|
|
Turbo inlets
What inlet manifolds and plenums are people using?
Think if using maybe a gtir one, but unsure if it worth sing the throttle bodys from them also? I think the spacing is miles out though, any other
options other than make one from scratch
Thanks
|
|
|
mark chandler
|
posted on 7/7/11 at 10:30 PM |
|
|
bent a bit of 2mm ali around a plastic drain pipe and welded up.
It split along the side welds after a while so I added some pins to stop it flexing.
Made it with trumpets inside as well, really keen that day
|
|
FASTdan
|
posted on 8/7/11 at 06:53 AM |
|
|
I have developed a plenum top casting, 4-5mm thick, just under 4000cc vol. The one shown was a prototype but I have a batch on the way in the next
week or so.....
Plenum
I am keen to develop this in a few formats as listed in that post. Should have pics of the Jenvey conversion soon.
NEW danST WEBSITE NOW LIVE! Bike carbs, throttle bodies and more......
http://www.danstengineering.co.uk/
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
matt_gsxr
|
posted on 8/7/11 at 08:21 AM |
|
|
Gtir plenum back. Plate on front which needs cutting to size and some holes to which you can mount your gsxr re-spaced TBI's.
Flak Monkey did a nice job of this, I also used that approach. It turns out nice and is cost effective and provides a take-off for a dump valve (if
you want to use it).
You can even polish it to a mirror shine if you really have time to waste (not mine I should add)!
Matt
|
|
beaver34
|
posted on 8/7/11 at 12:53 PM |
|
|
Was looking at usig the gtir one, but inwasnt really looking to down the throttle body route think Im having just one
Dan that inlet looks good
|
|
westy turbo
|
posted on 13/7/11 at 12:59 PM |
|
|
Same one here,great piece of kit,u can either go with bodies,or to a single one,i went 60mm
|
|
beaver34
|
posted on 13/7/11 at 03:19 PM |
|
|
what 60mm body did you use? where from?
|
|
westy turbo
|
posted on 14/7/11 at 04:28 AM |
|
|
Jenvey one,
|
|