westy turbo
|
posted on 6/8/11 at 06:26 AM |
|
|
1/2" UNF TO M14 rack extensions
Basicaly bought unibal rod ends(for mk2 rack) for my mk1 rack,but they are M14, still learning the hard way
are they any extensions out there from 1/2" to M14? or i have to fabricate them?
|
|
|
spiderman01980
|
posted on 6/8/11 at 07:24 AM |
|
|
i done the same thing, just get a mk2 rack its quicker and less stressfull!!
|
|
westy turbo
|
posted on 6/8/11 at 08:06 AM |
|
|
i think machine them will be less expensive and faster,
[Edited on 6/8/11 by westy turbo]
|
|
spiderman01980
|
posted on 6/8/11 at 08:14 AM |
|
|
just need to find someone that will do it, i found most of the time when your trying to get something made and you explain what you want done, you end
up getting a weird look and they say, nah you dont wanna do that your better off doing this, and that pisses me off, when i was getting my props
done(from a guy i used to deliver to)it took me and am not joking,about an hour and had to explain about 10 times and even drew a picture for him to
understand what i was going on about!!
[Edited on 6-8-11 by spiderman01980]
|
|
westy turbo
|
posted on 6/8/11 at 08:21 AM |
|
|
I know exact what u saying the good thing is that i have a good old school fabricator that he knows what he is doing,if they
were available of the self,would have been nice
|
|
spiderman01980
|
posted on 6/8/11 at 10:33 AM |
|
|
see if you can get the rod ends rethreaded to suit the rack, i think if you make the extention too long you might not be able to get the wheels
straight!
|
|
westy turbo
|
posted on 6/8/11 at 12:28 PM |
|
|
Ill make them the same that they are now,just different thread
|
|