Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Bike engine next to driver single seater Locost?
Alez

posted on 26/3/12 at 10:06 PM Reply With Quote
Bike engine next to driver single seater Locost?

As per the thread title. Could this be done?

My reasoning is:

Q: Why not classic Locost BEC?
A: I'd like the engine to sit closer to the rear axle.

Q: But the classic Locost BEC has a really good weight distribution
A: I'd like a low moment of inertia with respect to the rear axle. 50%-50% weight distribution must be good in order to achieve good lateral acceleration during corners, once your steering wheel is still at a certain angle. But when you are turning the steering wheel, having weight away from the rear axle is bad. Basically because you will be trying to change the direction of this weight somewhat as you turn the front wheels. This doesn't apply to weight placed on the rear axle simply because the rear axle goes always goes in the same direction: forward.

Q: Why not build a [link-->] MEV Atomic?
A: I don't like the [pic-->] E-W assimetry on its weight distribution. I understand that the engine position helps placing the CoG close to the middle of the car but I think this car must brake assimetrically and it must accelerate assimetrically (I'd like an open diff to help keep the car really light, btw).

Q: OK, then simply change the engine mounts to place the engine more to the rear
A: Because I think they got it fundamentally wrong in the first place, I think it's safer to use a proven chassis such as a Locost chassis or a chassis designed by Jeremy Philips (Fury, Riot).

Q: Since you are ok with having one seat only, and you don't want 4wd like on the [link-->] DP Cars D series, why not use a classic mid engine layout and get slightly better weight distribution plus central driving position?
A: I don't like the transmission solutions available for bike engined single seaters / mid engined cars. Chains need too much servicing and other solutions are expensive and / or use too much space.

So, could this be done using a Locost / Fury chassis? After all, Fisher once put a bike engine between the seats and the rear axle of a Fury (much bigger of a change I think), called it a [link-->] Fury Menace and said it worked good. Or maybe a mid engine chassis like the Riot would be better? Either the case, would I be able to use the original bodywork? Or should I make the distance between the axles shorter or move the driver position with respect to the axles, calling for major bodywork redesing?

Opinions, please

View User's Profile View All Posts By User U2U Member
jeffw

posted on 27/3/12 at 04:15 AM Reply With Quote
The Menace had the engine alongside the driver in the passenger seat effectively.






View User's Profile View All Posts By User U2U Member
iank

posted on 27/3/12 at 06:51 AM Reply With Quote
For the Atomic the E-W weight distribution will be pretty good (person on E, engine on W) are roughly comparable. It will certainly be much better than a 7 without a passenger.

The advantage (to my mind) is the extremely low polar inertia of that layout and the minimal weight of the thing.

Downside is one seat (obviously) and the noise in your left ear.

T66's Fiat BEC was going to use a range rover box which would be a cheap option if it works out.





--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous

View User's Profile View All Posts By User U2U Member
Slimy38

posted on 27/3/12 at 07:21 AM Reply With Quote
quote:
Originally posted by iankDownside is one seat (obviously) and the noise in your left ear.


Bikers have had a bike engine between their legs since the dark ages, with very few complaints! The engines themselves are quite quiet, it's the exhaust and wind noise that are much louder. As long as you can route the exhaust to somewhere behind the driver (which I believe is an IVA thing anyway) you should be fine.

You're right about the E-W distribution though, a bike engine weighs about the same as an average person. And from memory, for the N-S distribution MEV put the engine slightly more forward and the driver slightly back. But moving the engine forward and backwards is quite an easy task to be honest.

View User's Profile View All Posts By User U2U Member
adithorp

posted on 27/3/12 at 07:32 AM Reply With Quote
quote:
Originally posted by jeffw
The Menace had the engine alongside the driver in the passenger seat effectively.


...and I think, the drivers seat, pedal box and scuttle moved forward a bit. That'd mean adaptng the bodywork a bit.





"A witty saying proves nothing" Voltaire

http://jpsc.org.uk/forum/

View User's Profile View All Posts By User U2U Member
matt_gsxr

posted on 27/3/12 at 08:47 AM Reply With Quote
some examples here, mostly single seaters

http://www.dpcars.net/

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Alez

posted on 27/3/12 at 10:38 AM Reply With Quote
quote:
Originally posted by jeffw
The Menace had the engine alongside the driver in the passenger seat effectively.

quote:
Originally posted by adithorp
...and I think, the drivers seat, pedal box and scuttle moved forward a bit. That'd mean adaptng the bodywork a bit.

Oh, did it? Was the engine mounted N-S with a propshaft or E-W and chain driven?

quote:
Originally posted by iank
For the Atomic the E-W weight distribution will be pretty good (person on E, engine on W) are roughly comparable. It will certainly be much better than a 7 without a passenger.

The engine is a lot more to the front than the driver's CoG. I agree (from experience) that a Seven without a passenger is pretty poor.

quote:
Originally posted by iank
The advantage (to my mind) is the extremely low polar inertia of that layout and the minimal weight of the thing.

Downside is one seat (obviously) and the noise in your left ear.

The manufacturer quotes 335 kg total weight but I fail to understand how they got it SO light compared to a Riot or similar. Also a shorter car (I don't know wether that's the case) is both a good and a bad thing I guess.

I think the noise coming from the engine is probably negligible even at that distance from the driver, compared to exhaust noise and wind, which are pretty loud.

quote:
Originally posted by iank
T66's Fiat BEC was going to use a range rover box which would be a cheap option if it works out.

I didn't know about this one, I shall check it out and learn the details of its layout.

quote:
Originally posted by Slimy38
Bikers have had a bike engine between their legs since the dark ages, with very few complaints! The engines themselves are quite quiet, it's the exhaust and wind noise that are much louder. As long as you can route the exhaust to somewhere behind the driver (which I believe is an IVA thing anyway) you should be fine.

I would think so.

quote:
Originally posted by Slimy38You're right about the E-W distribution though, a bike engine weighs about the same as an average person. And from memory, for the N-S distribution MEV put the engine slightly more forward and the driver slightly back. But moving the engine forward and backwards is quite an easy task to be honest.

Have a look to the pic I posted a link for yesterday, I think they put the engine a lot more forward, not slightly, which I don't like. I think that's the wrong way to balance weight distribution.

quote:
Originally posted by matt_gsxr
some examples here, mostly single seaters

http://www.dpcars.net/

Yes, those are on my original post. Years ago the guy was designing the DP1 with conventional bike power and at some point he switched to V8 Hayabusa from Hartley Enterprises because he thinks the one from Powertec (as used by Radical) is not ideal.

View User's Profile View All Posts By User U2U Member
Alez

posted on 27/3/12 at 10:40 AM Reply With Quote
I mean this picture:

View User's Profile View All Posts By User U2U Member
MK9R

posted on 27/3/12 at 11:22 AM Reply With Quote
I have a new car build plan that will be doing something along these lines, but still fit in the RGB class f regs ...... Watch this space

[Edited on 27/3/12 by MK9R]





Cheers Austen

RGB car number 9
www.austengreenway.co.uk
www.automatedtechnologygroup.co.uk
www.trackace.co.uk

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
BobM

posted on 27/3/12 at 11:45 AM Reply With Quote
quote:
Originally posted by MK9R
I have a new car build plan that will be doing something along these lines, but still fit in the RGB class f regs ...... Watch this space







Not very Locost but very BEC

View User's Profile Visit User's Homepage View All Posts By User U2U Member
BobM

posted on 27/3/12 at 11:49 AM Reply With Quote
quote:
Originally posted by AlezI think the noise coming from the engine is probably negligible even at that distance from the driver, compared to exhaust noise and wind, which are pretty loud.

I disagree. There are 2 issues, induction noise and the mechanical engine noise.

The former is loud enough in my mid-engined car that I wear earplugs when racing/tracking as it's a very harsh and painful noise once the engine is under load at high rpm (and the air intake is close to my left ear).

Don't underestimate mechanical engine noise either - my car initially failed IVA but I reduced it from 103 to 99 dBA by adding sound deadening material to the engine bay. Some of the noise was panel resonance but at high rpm there's quite a lot of mechanical noise and it will be noticeable when the engine's right next to you.





Not very Locost but very BEC

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Slimy38

posted on 27/3/12 at 12:04 PM Reply With Quote
I see what you mean about the engine positioning, that top view really demonstrates how far forward it is. The pictures I've seen don't make it so obvious.

BobM, having ridden a few bikes I've never noticed that much mechanical noise. I can understand your thoughts on induction noise, especially with the intake being so close and having to be exposed. But the only appreciable sound from the engine is the straight cut boxes and the characteristic whine that they give off. Are you sure your engines are healthy?

View User's Profile View All Posts By User U2U Member
BobM

posted on 27/3/12 at 12:28 PM Reply With Quote
quote:
Originally posted by Slimy38BobM, having ridden a few bikes I've never noticed that much mechanical noise.
Yeah, I've ridden bikes too but you've got a nice big airbox and fuel tank between the engine and your ears on a bike. Also 3-4 feet of vertical separation, added to this is the fact that at 12k rpm in top you're doing near 180mph on the bike so massively more wind noise and no way you'll hear the engine!
quote:
Originally posted by Slimy38But the only appreciable sound from the engine is the straight cut boxes and the characteristic whine that they give off. Are you sure your engines are healthy?
Yes, pretty confident my engines have been healthy You get quite a lot of top end and cam chain noise.





Not very Locost but very BEC

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Stott

posted on 27/3/12 at 02:54 PM Reply With Quote
I agree with Bob, mech and induction noise are incredible when it's sat next to you.

Having owned bikes too I can definitely say they are not comparable.

View User's Profile View All Posts By User U2U Member
Alez

posted on 27/3/12 at 04:07 PM Reply With Quote
OK, so noise is an issue.

Right, here's the best pic of a Menace I've been able to find:


Longitudinally mounted engine, to me it looks very similar to the Atomic concept-wise. I wonder why they placed the engine there instead of next to the driver, may that have to do with the transmission arrangement? Is that still a propshaft?

View User's Profile View All Posts By User U2U Member
maccmike

posted on 27/3/12 at 05:06 PM Reply With Quote
http://www.dpcars.net/


very cool looking car

View User's Profile View All Posts By User U2U Member
Alez

posted on 28/3/12 at 02:55 PM Reply With Quote
quote:
Originally posted by iank
T66's Fiat BEC was going to use a range rover box which would be a cheap option if it works out.


Here it is:

http://www.retropower.co.uk/projects_126_Blackbird.htm

This must be this box:

http://www.locostbuilders.co.uk/viewthread.php?tid=146963



However I've also found this:

http://www.locostbuilders.co.uk/viewthread.php?tid=162229



Does anyone know what happened to this project? Is T66 still active on this forum? As I understand it, the transmission idea changed, but I don't understand well, I really like this stuff but my knowledge on these things is very poor and so it is my English, also I don't know what a "transfer box" is. I've seen mentions of different approaches: this range rover box, chain drive and something else from Powertec too.

View User's Profile View All Posts By User U2U Member
Volvorsport

posted on 1/4/12 at 04:58 PM Reply With Quote
look at a clubmans car , a mallock or something





www.dbsmotorsport.co.uk
getting dirty under a bus

View User's Profile Visit User's Homepage View All Posts By User U2U Member
JoelP

posted on 1/4/12 at 06:07 PM Reply With Quote
I half built a bec with the engine in the passanger footwell. Was planning on still getting a seat in, just with minimal leg room - knees up to chin! You would have good balance all round, and a low polar moment. You could also have longer front wishbones if you wanted, and a better aero profile.

Scrapped mine in the end, because i realised i should have started with a scratch build, rather than modifying an existing locost chassis.

4wd isnt really needed for a single bike engine.

Transfer box is just the middle box on an offroader, that splits drive front to back.






View User's Profile View All Posts By User U2U Member
iank

posted on 1/4/12 at 08:38 PM Reply With Quote
quote:
Originally posted by Alez
...
Does anyone know what happened to this project? Is T66 still active on this forum? ...


Still being built, and yes he's still active, try a u2u





--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous

View User's Profile View All Posts By User U2U Member
Alez

posted on 6/4/12 at 09:11 PM Reply With Quote
Thanks, guys

[Edited on 6/4/12 by Alez]

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.