FuryRebuild
|
posted on 2/12/15 at 12:34 PM |
|
|
Anyone want to sell a clutch alignment tool or flywheel locker?
Hi All
Does anyone want to sell a clutch alignment tool for a duratec? I have the kind that grips the clutch to the clutch-plate, but I would prefer the one
that inserts into the spigot bearing and clutch.
Similarly if you have a flywheel locking tool that you're up for selling, I'm interested. I have a universal flywheel locking tool, but it
doesn't fit my flywheel.
Thanks
Mark
When all you have is a hammer, everything around you is a nail.
www.furyrebuild.co.uk
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
HowardB
|
posted on 2/12/15 at 03:38 PM |
|
|
I manufactured one from a turned nylon rod with a tapped hole in the end,. I can do the same for you if that helps,.
I'd just need the dimensions,. od/length for the spigot, and then the same for the clutch...
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
kj
|
posted on 2/12/15 at 07:40 PM |
|
|
I think I have one £10 including post
Think about it, think about it again and then do it.
|
|
FuryRebuild
|
posted on 2/12/15 at 09:51 PM |
|
|
Hi KJ, Howard
I'm interested in both. I'll opt for KJ's option first just because it may be easier all round. I also like the idea of a custom
machined one. KJ, can you let me know what model it to is please.
Many thanks for your help.
When all you have is a hammer, everything around you is a nail.
www.furyrebuild.co.uk
|
|
dave r
|
posted on 4/12/15 at 05:03 PM |
|
|
Made my own locking tool.... fits in place of the starter motor.....
Can send you a pick if you want to makes your own
I'd love to give my imaginary friend a great big hug,
but this jacket makes it impossible.
|
|