Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Xflow running in
GaryM

posted on 7/6/21 at 04:33 PM Reply With Quote
Xflow running in

1600GT xflow, recent rebuild where:

Cylinders bored to first oversize.
New pistons & rings.
Reground crankshaft and new bearings fitted.
New valve guides and valves.

Currently full of Valvoline VR1 20w/50 oil.

How many miles should I run the engine in for?

Ta
Gary

View User's Profile View All Posts By User U2U Member
rusty nuts

posted on 7/6/21 at 08:58 PM Reply With Quote
I never exactly run mine in except I used some cheap oil for around 500 miles before changing to Valvoline just before a rolling road session
View User's Profile View All Posts By User U2U Member
steve m

posted on 8/6/21 at 07:20 AM Reply With Quote
My crossflows were built with power in mind, but i used cheap mineral oil from asda for the first run and idleing, and first 50 or so miles, to make certain of any tiny bits of engine were trapped in the filter, also any water vapour that crossflows like to collect

Then for the next 300-500 miles depending on how the engine felt, i would use premium oil, and always change the filter

As for engine speeds, no harsh accelerating, and kept under 3-4k for the first 300 miles ish





Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at




View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.