Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Locost geometry for BEC - sierra IRS
crimondbanger

posted on 5/4/22 at 07:32 AM Reply With Quote
Locost geometry for BEC - sierra IRS

Does anyone have a setup sheet for a Stuart Taylot R1 BEC Locost front suspension?

I've just rebuilt the front end on my car . Had all new bushes /track rod ends / ball joints etc so could do with checking toe in and camber as its most likely out .

Car will be used as road toy and track car with Yokohama a032 tyres.

Any info greatly received , trying to get it out for the weekend so no time for professional setup, but ballpark with the tools i have will keep it straight ....hopefully.

View User's Profile View All Posts By User U2U Member
Sanzomat

posted on 5/4/22 at 10:39 AM Reply With Quote
My Locost R1 with IRS was set up with 2.5 degrees negative camber and 10 minutes of toe out at the front for track use. Feels pretty good to me but I'm not the best driver! It has MK indy classic front wishbones so quite a wide track
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.