oliwb
|
posted on 27/11/06 at 08:39 PM |
|
|
Scottish Engine Specialists
Hi wondering if anyones got any good leads on engine specialist in Scotland....the closer to Aberdeen the better. Basically I'm after flywheels
being lightened, cranks, con-rods and pistons balanced etc and possibly some porting....planning on having the cams reground (probably by cat cams who
have had good write ups) It's for a 2L zetec engine by the way....also any leads on good cheap suppliers of various bits would be great
too...eg gaskets, piston rings ARP bolts etc etc....I'm only planning on doing this once and am pacing myself so I can spread the cost so I
really want to get it right! Cheers Oli.
PS.
I do know of one place called agar or aga or something in Dundee I think who are supposed to be OK anybody any experiences???
If your not living life on the edge you're taking up too much room!
|
|
|
ecosse
|
posted on 27/11/06 at 08:50 PM |
|
|
I'll second that, Agra Engineering is the place to go.
They built a BDA for me many years ago, top outfit.
Cheers
Alex
|
|
Johnmor
|
posted on 27/11/06 at 08:50 PM |
|
|
Cant think of a good engine specialist in the Aberdeen area but I know AGRA have a good name, just a bit further away.
PS dont send it to AGA theyll cook it and cover it in stove enamel.![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif)
|
|
oliwb
|
posted on 27/11/06 at 08:51 PM |
|
|
Thats the one! Do you know if they've got a website at all?? I think they're based in Dundee, any idea where?? Might have to give them a
call and see how much its all gonna set me back! ££$$££....urgh!
If your not living life on the edge you're taking up too much room!
|
|
oliwb
|
posted on 27/11/06 at 08:53 PM |
|
|
Cooking engine?? Oven enamel....could be a good look....now imagine if you could find an AGA badge from somewhere and rivet it onto the block....how
cool....Oli.
PS.
Factory sponsors anyone?
If your not living life on the edge you're taking up too much room!
|
|
omega 24 v6
|
posted on 27/11/06 at 09:42 PM |
|
|
Hi Oli what about Walden engineering in Aboyne (I think) I believe it is now owned/run by Barry Clark the rally driver son of(clarke comercials
aberdeen).
Walden
Or precision engine specialists in Elgin
Precision
The Hotrod in the walden photo is a mates ex race car. He dealt with them before the business changed hands.
Precision in Elgin was the prefferred (sp) choice of the Inverness area hotrod drivers (Pinto's).
I've never dealt with any of them myself as such. The B.I.L deals with (Edinburgh area "Engine services roslin" ) .
Most of the knowledge with these guy's is with the superior XE engine![](/images//smilies/tongue.gif) but they may be able to offer you an idea of where to go/get info for
the Zetec.
Hope this helps.
Oh and Agra have a dark dingy workshop in Banff (harbour area) as well.
[Edited on 27/11/06 by omega 24 v6]
[Edited on 27/11/06 by omega 24 v6]
If it looks wrong it probably is wrong.
|
|
Johnmor
|
posted on 27/11/06 at 10:17 PM |
|
|
Precision Engineering
Cant swear to it but i put a lancia twin cam in to their sister company in Aberdeen for a rebor.
Got the engine back, rebuilt and discovered he mixed up 40 thous" and 0.4mm, had to get the bolck sleeved as he had bored byond he largest
piston availiable.
Not impressed, but that was a few years ago.
![](/images//smilies/wink.gif)
|
|
tadltd
|
posted on 27/11/06 at 11:43 PM |
|
|
Pistons & Components in Glasgow should be able to sort you out with all the bits (find 'em on yell.com).
West of Scotland Engineering in Yorkhill, Glasgow also do engine building, but I've also heard good things about AGRA.
Best Regards,
Steve.
www.turnerautosport.com
|
|
mcerd1
|
posted on 28/11/06 at 12:12 PM |
|
|
quote: Originally posted by tadltd
Pistons & Components in Glasgow
... or Edinburgh: P&C
I'm going to use Engine Services in Rosewell (used to be Plenderleith) do alot of work for stock cars (pinto's) they do loads of other
stuff too (Pug, Vauxhall, V6, V8.....just about anything)
P&C in edinburgh recommended them as did everyone else down this way I've asked
Tel: 0131 440 0201
[Edited on 28/11/06 by mcerd1]
|
|
skint scotsman
|
posted on 28/11/06 at 08:14 PM |
|
|
not wanting to give out bad press
but a few years back a mate of mine put a reno 5 head in to agra to be preasure tested
ended up "they decided to skim the head snaping the water pump bolts in the process so needed a new water pump , billed him for over £150 .
all he asked for was a preasure test.
may be better with something less boyracer-ish
just my 2ps wurth
|
|