pmully
|
| posted on 3/2/08 at 07:31 PM |
|
|
coil over springs
Hi can anyone help me i would like to know what engine oil i should be using for my Locost
Also what lbs springs do I need to use on the front and rear?
Many Thanks
[Edited on 4/2/08 by pmully]
[Edited on 4/2/08 by pmully]
|
|
|
|
|
joneh
|
| posted on 3/2/08 at 07:46 PM |
|
|
What engine are you using?
|
|
|
Mr Whippy
|
| posted on 3/2/08 at 07:56 PM |
|
|
boy a bit more info would help
Fame is when your old car is plastered all over the internet
|
|
|
pmully
|
 posted on 4/2/08 at 05:44 PM |
|
|
I am using a 1300 Xflow engine and am intending to race in the 750 motor club championship.
Any help would be appriciated
Many Thanks
Paul
|
|
|
procomp
|
| posted on 4/2/08 at 07:56 PM |
|
|
Hi only one engine oil to use for the x/flow. 20/50 Valvoline racing. or VR1 i think its called now.
Pic courtesy of Burton power who sell it if you can not get it locally. BURTON LINK
Springs is dependent on many things but ballpark is 300lb - 350lb front and 120lb - 150lb rear.
Any questions regarding the locost championship would get a quicker more informative reply in the racing section  .
HTH cheers Matt
OH and welcome 
[Edited on 4/2/08 by procomp]
|
|
|
pmully
|
 posted on 6/2/08 at 08:56 PM |
|
|
Thanks a lot for that I really appriciate it
|
|
|
