wilkingj
|
| posted on 21/9/08 at 06:59 PM |
|
|
Luego Wing Mirrors
Several of us have the mirrors as supplied by the original Luego Company.
One of mine has broken, ie the knuckle joint plastic bit broke. Leaving me with a floppy mirror.
No one seemed to know exactly what bike they came off.
Well yesterday, it being a nice day. I went out for a drive, and ended up in Peterborough (via a cross country route )
I stopped at motor cycle shop in Lincoln road. Now this was a good Guess they might have supplied Luego when they were at Peterborough.
The lady in the shop confirmed they did supply Luego, and they even ad a couple of sets in stock that were ordered and never picked up. So I got
myself a replacement Driverd mirror.
They are off a GSX 600/750F.
So if anyone needs a matching mirror thats what they come from.
Hein Gericke
174 Lincoln Rd
Peterborough
01733 898338
Hope this is of use to someone.
Piccy of the original Luego Domonstrator with the Miirror in question.
 
O/Side Mirror Mounting 1
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
|
|
|
big_wasa
|
| posted on 21/9/08 at 07:52 PM |
|
|
Did they pass sva ok, They are not far from me and they look just the job 
|
|
|
saigonij
|
| posted on 21/9/08 at 08:12 PM |
|
|
Excellent. i have bene after a set of these for ages! thats excellent news!!!!
im ordering a set tomorrow.
|
|
|
tomgregory2000
|
| posted on 21/9/08 at 08:39 PM |
|
|
nice, what size glass is fitted to those?
Thanks
Tommy
|
|
|
wilkingj
|
| posted on 21/9/08 at 09:29 PM |
|
|
No probs with SVA. But just mount them so you can see all the marks.
I failed SVA as mine were fitted too low, and the line to the nearest marks went through the rear mudguards, hence the fail.
ie you could see someone standing on the marks, but not the marks themselves. (or eg a brick on the floor)
There is a section in my archive with the SAV mirror pages in it.
They are fairly big mirrors 4x3" approx. Slightly triangular (rounded).
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
|
saigonij
|
| posted on 22/9/08 at 07:55 AM |
|
|
great!
just gave them a ring - the only person who was around at that time is now on holiday - and the guy who answered the phone suggested rining back next
week!
bloody typical! just my luck.
|
|
|
Numb nuts
|
| posted on 25/9/08 at 07:28 PM |
|
|
Went into Hein Gericke in Norwich (01603 764466) today and bought a pair of mirrors.
Part numbers as follows:
31321810085 left GSX600/750F
31321810035 right GSX600/750F
Priced at £21.99 each.
Spoke to Mark at the shop who stated these goods can be ordered at any Gericke store.
Happy shopping
|
|
|
saigonij
|
| posted on 2/10/08 at 07:23 AM |
|
|
received my wing mirrors from them yesterday - really fast postage too.
im very very pleased now! thanks for the tip off!
|
|
|
wilkingj
|
| posted on 2/10/08 at 03:14 PM |
|
|
quote:
Originally posted by saigonij
received my wing mirrors from them yesterday - really fast postage too.
im very very pleased now! thanks for the tip off!
This is EXACTLY the point of the Forum...
To help each other out. Even simple info makes life a bit easier.
Glad to help.
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
|
wicket
|
| posted on 2/10/08 at 05:02 PM |
|
|
Do the Hein Gericke mirrors have flat glass or convex?
|
|
|
saigonij
|
| posted on 3/10/08 at 07:17 AM |
|
|
flat.
|
|
|
DanP
|
| posted on 4/10/08 at 06:00 PM |
|
|
thanks for the info! I went and picked up a set from the Portsmouth branch today, they even had them in stock already! Really chuffed to have found a
set.
Cheers
Dan
|
|
|
DanP
|
| posted on 4/11/08 at 10:16 PM |
|
|
finally got round to trying to fit these tonight but if I mount them in the same place as in the luego demo car pic them they don't seem high
enough to see over the wheel arches for the SVA test where you have to see something on the ground 10m away.
Can anyone post a picture of how theirs are mounted, or tell me the height off the floor of the lens please? Or have I just misunderstood the SVA
spec?
Cheers
Dan
|
|
|
