I have got everything wired up on my RX1N clocks except the rev counter and am unsure how to connect it to the engine.
I have done a search and some people have tapped into the wire coming out of the ecu but I dont know which one this is (I have the haynes scematics
but cant find it) .
Does anyone know what wire I should be tapping into or have alternative ideas.
thanks
PS engine is a 5PW
its the wire from the ecu but you will need the exup servo from the 600 to avoid the fault code.
mine is wired into one of the plugs, little jumpy though
Mines a 2000 R1 and i have mine wired to the ecu wire. No exup and verything seems fine, seems to be spot on when it went on the rollers.
Cheers
Adam
thanks for the info - just need to work out what wire to use