Board logo

Mileage Correction - 2003 R1 Clocks
spdpug98 - 12/8/10 at 01:43 PM

Has anyone had their 2003 R1 clocks re-set, I have been meaning to get mine set to the correct mileage for a while

Well today after getting it booked in, I have had a wasted 90 mile round trip after they found out they couldn't do them as they either need a special connector OR need to remove the LCD screen complete (including all the soldered joints) which will probably break/damage it

So, has anyone actually had theirs done and if so who did you get to do them

Johneturbo - 12/8/10 at 02:06 PM

i had mine done, i had to send them off thou to guy called kenny decode!
think i have his number somewhere or do a search

spdpug98 - 12/8/10 at 02:10 PM

quote:
Originally posted by Johneturbo
i had mine done, i had to send them off thou to guy called kenny decode!
think i have his number somewhere or do a search


Where they 2003 clocks and how much did it cost (feel free to PM if you want)

Johneturbo - 12/8/10 at 02:12 PM

here's the thread http://www.locostbuilders.co.uk/viewthread.php?tid=82423

no mine are 05 clocks, should be the same to reprograme thou

spdpug98 - 12/8/10 at 02:15 PM

quote:


no mine are 05 clocks, should be the same to reprograme thou


Cheers, the bloke I saw today said he could re-programe them but the chip he needed to get to was under the LCD screen and that was his problem - will give the bloke you used a call and see what he says

spdpug98 - 12/8/10 at 02:23 PM

Thanks - Spoken with Kenny 'decode' and will be sending them up to him

CRAIGR - 12/8/10 at 02:25 PM

Did he give you a price ??

quote:
Originally posted by spdpug98
Thanks - Spoken with Kenny 'decode' and will be sending them up to him

spdpug98 - 12/8/10 at 02:36 PM

quote:
Originally posted by CRAIGR
Did he give you a price ??
quote:
Originally posted by spdpug98
Thanks - Spoken with Kenny 'decode' and will be sending them up to him


Yes........a lot cheaper than the companies down on the South Coast (I'll PM you - just incase he doesn't want it all over a forum)

Red16 - 12/8/10 at 06:13 PM

where is this kenny decode based?

spdpug98 - 12/8/10 at 06:17 PM

Manchester

adithorp - 12/8/10 at 08:24 PM

Kenny- decode did mine on 06R1. He does loads of radio decodes for me at work and I think I might have originally given john his number.

adrian

spdpug98 - 14/9/10 at 11:01 AM

I know a few of you wanted an update on how the mileage correction went with Kenny Decode, all I can say is 'top service from a top bloke'

He did the clocks the same day as he got them and sent them straight back, arrived the next day

TQ_uk - 15/9/10 at 04:31 PM

Alternatively can you use a Speedohealer?

spdpug98 - 15/9/10 at 04:42 PM

quote:
Originally posted by TQ_uk
Alternatively can you use a Speedohealer?


I have a speedohealer but they don't change the mileage readout on the clocks, just the speed registered/indicated

[Edited on 15/9/10 by spdpug98]