Hi, what do i need to do to a std type 9 to fit a 2.0 zetec engine?
Thanks
check out westfield world they have info on there
linky
Have a look here:
http://www.zetecinside.com/xr2/gearbox.shtml
Nothing
You will need a bit of mix and match on the clutch though.
what type of mix and match?
There are lots of combinations that work
one is
1.8 flywheel
early mondeo clutch kit with 220mm clutch with 23 spline 1" center.
Longer thrust bearing from an early 4spd box ( do a search for part Number )
and dont forget the spigot bearing from any sierra.
The tin cover from the T9 needs a bit welding onto it to cover completley.
any links for instuctions and pic's ?