Hi, I need to get some poly bushes for my standard locost trailing arms but not sure what or where to get them... any help please i kinda need them this week !!

POLY BUSHES TO FIT SPIT,GT6,VITESSE,HERALD WISHBONES | eBay things can be found on ebay.

just ask for the dims to check.

Cheers.. i looked for kit car bush, no wonder nothing could be found !!

The book was bassed on the metalastic bushes from the above.

Dim's of them would be I/D is 7/8 inches [9mm] The O/D is 7/8 inches [ 20 mm ] The length is 1 7/16 inches [ 35 mm ]

I found when fitting mine I needed longer crush tubes as the top hat shoulders sit out side the wishbone tube. I made by own and did the bore m10.

Reminds me I need a spare

Think the I/D should be 7/16". Cheers Ray

Try these:

http://www.superflex.co.uk/categories.php?cat=73

Cheers
Dave

Not having a lot of luck. Looks like my arms holes are 40mm length x 25mm diameter.
Any more suggestions please, thanks

Have you tried Wisbech engineering ? they have a web site and list poly bushes but don't list sizes i think they supply a lot of kit manufacturers.
Paul

quote:

---

Originally posted by jonno
Not having a lot of luck. Looks like my arms holes are 40mm length x 25mm diameter.
Any more suggestions please, thanks

---