Just some bits and bobs from a garage clear out, thought i'd put them on here before i put them on ebay.
Pinto Starter motor, came off 2.0 pinto, believed to be LRS 707, reconditioned about a year ago but had very little use since then due to conversion
to zetec. Been dry stored since.
5 x Smith 7 spoke alloys, 4 of which have good tyres as seen in pics, the spare has balding on the outer edge due to damage to the wheel which was
inflicted before I bought the car. All tyres are Nankangs. could do with a good clean. a few scrapes as to be expected with used items. 4 x 108 PCD
(ford) 7J ET 22
Standard Zetec Inlet Plenum - Removed from new engine and dry stored complete with gaskets.
Zetec Blacktop Front covers - Removed from new engine and dry stored.
Wiper motor - Mini
Standard Zetec blacktop exhaust manifold
Pinto 4 branch through chassis exhaust down pipes
Standard Zetec Fuel rail and return pipe with Fuel pressure regulator
Open to offers. Collections and Postage available.
Cheers for looking.
David
You've missed out the size of the alloys
quote:
Originally posted by Mr G
You've missed out the size of the alloys
on the tyres lol
I do apologise, they are 7j x 15 4x108 pcd ET22
I had a skin full of heavy when i did this.
HTH
David