Board logo

wtd. Sierra drive shaft bolts and hub nuts.
owelly - 13/1/12 at 10:09 PM

As the title. Both hub nuts have been butchered with a cold chisel and even though most of the drive shaft bolts came out without fighting too much, I'd like to fit new ones. There's a couple of bolt sets and hub nuts on Ebay but I thought I ask here first.
TIA.

daniel mason - 13/1/12 at 10:45 PM

if they are the bolt on shaft bolts you want i have a load spare.brand new as i needed some for my shafts. ill chuck em in with the silencer if you want them. let me know asap so i can post it to you

owelly - 13/1/12 at 10:52 PM

That would be most excellent. Cheers.

daniel mason - 14/1/12 at 04:59 PM

ok mate. think ive got 12 of them if thats ok

DRCorsa - 14/1/12 at 05:36 PM

I replaced the stock Torx bolts with the exact same ones, except the head was Allen.
Torx may be a pig to remove, i know because i have broken a pair of Torx bits along the way..

[Edited on 14/1/12 by DRCorsa]