My MK has just failed its MOT on headlight ‘kick’.
I’ve got Dominator style lights fitted which are now being sold as not road legal
Has anybody got some headlights kicking around that they would part with and post?
Cheers.
Matt
quote:
Originally posted by mk7matt
My MK has just failed its MOT on headlight ‘kick’.
I’ve got Dominator style lights fitted which are now being sold as not road legal![]()
Has anybody got some headlights kicking around that they would part with and post?
Cheers.
Matt
The lights already have this small mod.
They too passed the SVA and previous MOT’s.
Same MOT tester this year as last and he seems quite apologetic about it, says the changes in May have tightened the rules.
The failure was “Headlamp aim so that beam ‘kick up’ is not visible on the screen”
Not a lot I can do other than replace.
Thanks.
Does sound as tho' he's being very picky - so far as I'm aware there weren't any changes in the new regs that relate to headlamp
pattern, they still accept a flat beam on IVA & I recall the "British American" sealed beams of the 70's & 80's having a
flat dip beam, so I don't understand why "kick up" not visible would be a fail.
I take it you are getting a normal flat & kick up pattern if you shine them against the wall? It could be that bulbs aren't seated or that
reflectors have corroded
I’m going to check over all that I can now.
Might it be because they are ‘E’ marked they should have the kick, and not be classed as British American?
Thanks for your help with this.
From the manual:
A flat top or other alternative headlamp dipped beam pattern is acceptable as long as all of the beam upper edge, including any ‘peak’ is contained
within the appropriate tolerance band.
They have reworded the failures, but a flat beam pattern is still acceptable for mot.
Dave
U2u sent
So, I’ve just popped down to the MOT centre and had a word.
We got the car in front of the beam setter and he showed me the issue.
There is no definitive line to shade the top of the circle pattern of light. if that makes sense.
I can see that there is a shallow ‘V’ pattern but the edges are not sharp.
The tester did let me rotate the lense and adjust the lamp to try and get around the issue but it wasn’t good enough.
I think the tester is taking the p1ss! Light patterns were never well defined, that is a new thing that came about with projector & subsequently
LED headlamps, I'd say he's an idiot! Feel free to tell him I said so (I doubt that will help!)
In all seriousness, I doubt the pattern on most 5& 3/4" lights will be any better defined - worth seeking the opinion of another MoT station?
I'd be interested in the dominators if you sell them?
... and they're black!
Just to update this thread.
Many thanks to Flick, who kindly swapped lights with me.
The new 5 3/4 lights have a significantly more defined pattern than my old Dominators.
MOT now passed.
Thanks for everyone’s help.
Matt
Hmmm, very interesting thread this.....
Think I might keep my 5 3/4 light jut in case I have a similar problem when I eventually get around to putting mine back on the road