Hi i require about 20 x m5 Clamping Studs like the picture below with the hex part for a spanner, i have looked everywhere but cant find m5 ones anywhere! can someone point me in the right direction?

thanks




[Edited on 16/11/13 by dan_g8]

[Edited on 16/11/13 by dan_g8]

Why do you specifically need the hex part?
As opposed to just using 5mm threaded bar and a pair of nuts locked to fit it?

It's for a project that I'm working on, I need to join 2 bearing blocks together. They have tapped holes but they don't go all the way through to the other side. The studs a no go because of this, one side would need to be left hand threaded and the other right handed to pull the blocks together when tightened?

Do a search on Ebay for M5 linkage screw. May be cheaper to have a small batch made by a local machine shop or a fellow locoster for beer vouchers etc

Perhaps these people might be able to help?

MARYLAND METRICS

You'll need some time to go through all their products.

Regards,

Albert

quote:

---

Originally posted by dan_g8
It's for a project that I'm working on, I need to join 2 bearing blocks together. They have tapped holes but they don't go all the way through to the other side. The studs a no go because of this, one side would need to be left hand threaded and the other right handed to pull the blocks together when tightened?

---