Hi All,

Wondering f someone can help. I have a KOSO gauge which is working perfectly. Speedo is set up (To within 1mph on the sva ) I have an acumen gear indicator and i have to tap into the speedo on the koso. There are thre wires on the kos loom that connect to the speedo sensor, any idea's which one it is?

Cheers
Adam

cant remember off the top of my head but put a meter across each of the wires (1 at a time) and to ground spin the magnets and watch the meter you will see it bounce voltage this is the wire you need.

Will have a look to see if I have my wiring still

YQUSTA

Edit: dont have the wire colour sorry

[Edited on 10/12/08 by YQUSTA]