hi all, i need some help, i have a koso dash to fit to my car, but the fuel gauge ohm setting's are 100ohm's or 500ohm's, but i have a
standard sierra fuel sender and the reading about 20ohms full and around 260/270ohms empty, so what can i do?
can i ad reistors insuch away, it will work or do i need a need sender unit to match the ohms reading of teh dash?
if resistor what size?
if new sender does anybody know of one i can fit?
thanks
stuart
personally i would fit a new sender, one that is caibrated to match the dash, it will save a lot of hassle
Could you not just bend the sender arm through 180 deg
Then see if your dash works
Hi,
I fitted a sender from a black bird and works fine with the Koso gauges
Hope this helps
Cheers
Adam
hi all, does anybody know where the blackbird fuel sender enters?
i have my hole at the top will it work?
thanks
stuart
I fitted mine in to the top of my MK tank. Bit of bending of the float is needed but works fine.
Cheers
Adam
Sorry Stuart got no pics just keep offering it to the tank, thats all i did.
Sorry i can't be of any help
Cheers
Adam
ok, thank you any way.
stuart