I am having real trouble with my dash electrics. i cant figure out how the indicators work or the head lights.. if someone can help me there are cupboards full of cakes and tea at my house (in luton).

Indicators are very easy to wire up as are the hazards if you find a link to the wiring article i have posted on here it explains them in an easy way...
basically.....ignition switched live to indicator relay then to hazard switch then to feed position (middle) on indicator switch.....the other two wires are left and right indicators.
then a permanent live to the hazard relay then to the haz sw. the haz sw. will turn on both left and right indicators.....

http://www.godspeed.me/forums/viewtopic.php?f=14&t=1058

Read this.......it will help you....
or contact me at 07850773394 i may be able to help over the phone.

Are you using stalks or toggle switches? If stalks, which ones?

Regards,
Dave

The PDF file in snowys link was a godsend to me, I have wired up my indicators and lights from scratch using it. It was very easy to follow, and should be of help to you. Here are the lights and indicatior diagrams from it, but i would recommend reading it all.





[Edited on 3/2/12 by monkeyarms]

I got stuck on my indicator wiring. In the end I had to draw it all out to make sense of it. Then it was much easier to fix. Maybe some help:

Thank you for the vote of confidence Monkeyarms, i often wonder if anyone other than myself has tried to rewire their cars using my circuits.

quote:

---

Originally posted by snowy2
Thank you for the vote of confidence Monkeyarms, i often wonder if anyone other than myself has tried to rewire their cars using my circuits.

---

i am glad it achieved what i had hoped, i don't get to find out in the normal run of things. Dave.