Board logo

OT - new favourite tool
nick205 - 13/5/13 at 12:52 PM

Picked up a set of these over the weekend as I had to reseal the bath and shower. They are officially my new favourite tool.

I've never ever been able to get a good finish on silicone joints and these things just work




[Edited on 13/5/13 by nick205]


Jasper - 13/5/13 at 01:04 PM

That's looks great, I need to redo my bath for the third time as it's looks poo and is going mouldy, I'll see if there are some on Ebay


iank - 13/5/13 at 01:09 PM

where did you get them?


Jasper - 13/5/13 at 01:21 PM

There's some on Ebay for a fiver....


balidey - 13/5/13 at 01:59 PM

You will always get someone who will tell you they are a waste of money. These are the people that can do a neat seal straight off.
I can't and bought something similar a while ago. Well worth the money. Although mine are the smaller, square shaped ones with a different rad on each corner. About £5 from ebay.


nick205 - 13/5/13 at 02:08 PM

£5 from Screwfix, which is less than a decent tube of silicone.


Slimy38 - 13/5/13 at 02:56 PM

I used one of these;

http://www.screwfix.com/p/sealant-tool/10994

Basically it's like a rubber finger, so whenever the instructions say run your finger along the bead, I used this instead!


acb2713 - 13/5/13 at 03:01 PM

I simply run masking tape along the bath and tiles, leaving an appropriate gap for the silicone bead. Then, with a water-wetted fore-finger, I simply run that along the just-applied silicone, smoothing it out for an even bead. Very carefully, immediately remove the masking tape for a no-smears result. Job done.


keith777 - 13/5/13 at 05:56 PM

quote:
Originally posted by nick205
Picked up a set of these over the weekend as I had to reseal the bath and shower. They are officially my new favourite tool.

I've never ever been able to get a good finish on silicone joints and these things just work




[Edited on 13/5/13 by nick205] [/quote


I work in hotel maintenance & use these, highly recommend them


ReMan - 13/5/13 at 06:19 PM

Blow me, I just picked these up in LIDL!
http://www.lidl.co.uk/cps/rde/SID-8FA96418-DCBE75B9/www_lidl_uk/hs.xsl/our-offers-2491.htm?action=showDetail&id=2162


nick205 - 13/5/13 at 10:02 PM

quote:
Originally posted by ReMan
Blow me, I just picked these up in LIDL!
http://www.lidl.co.uk/cps/rde/SID-8FA96418-DCBE75B9/www_lidl_uk/hs.xsl/our-offers-2491.htm?action=showDetail&id=2162


Even better, half the price and an extra part too!

Didn't come in a handy case though did they


loggyboy - 13/5/13 at 10:10 PM

Eh? Tool? What's wrong with a wet finger??


cerbera - 13/5/13 at 10:14 PM

quote:
Originally posted by loggyboy
Eh? Tool? What's wrong with a wet finger??


There's nowt wrong with a wet finger


nick205 - 14/5/13 at 08:16 AM

quote:
Originally posted by loggyboy
Eh? Tool? What's wrong with a wet finger??


Probably nothing wrong with your wet finger, but mine never works as well as I'd like. These little things just work.


Jasper - 14/5/13 at 09:01 AM

No, nor mine, I'm poo an silicone beads, always use too much and it's uneven then the mould gets in .......


acb2713 - 14/5/13 at 02:49 PM

quote:
Originally posted by Jasper
No, nor mine, I'm poo an silicone beads, always use too much and it's uneven then the mould gets in .......


And that's where the masking tape comes in. Any extra silicone is pushed onto the tape by your finger. Once the masking tape is carefully removed, you are left with a perfectly straight and even silicone bead.

[Edited on 14-5-2013 by acb2713]

And the masking tape must be removed straight away, before the silicone has had a chance to set.

[Edited on 14-5-2013 by acb2713]