Can someone tell me if there is a standard Sierra clutch which is 200mm diameter, has a 1" shaft and 23 splines?

It is for fitting into my toyota housing to mate the Ford type 9 box onto my Toyota 4AGE engine.

Any help appreciated.

Cheers.

Try asking Dreckly via u2u he should be able to help.

Kind regards,
Darren

I had a similar problem when mating up my Vauxhall to type 9. If you go to your local motor factors he will have a book listing all the friction plate sizes for all the different Ford applications.

look on www.qha.com where you will find the dimensions you are looking for

quote:

---

Originally posted by bazwaz
I had a similar problem when mating up my Vauxhall to type 9. If you go to your local motor factors he will have a book listing all the friction plate sizes for all the different Ford applications.

---

Couldn't see a 200mm one but here is the QH clutch book so you may well find another one that meets your requirements.

Thanks guys for the help. Appreciated.

There are a few available, road, race, heavy duty etc, bolt straight in with the 4AGE to Ford type9 bellhousing, 3.5 kg steel flywheel manufactured with ring gear goes well too.