OK if I go for a standard zx9r bike can and it has the three studs on the end as below how does it attach to the exhaust? Is it just a push on fit or would I need a flange to fit on the three studs? Sorry might be a stupid question!

Rich


zx9r can 3stud

Do you have the front part of the can and pipe to go with that? Cut it off short and go from there?

ie this part here

[Edited on 2/3/09 by Paul TigerB6]

Ah no, considering a std can to use on an exhaust planning to have made up from one I have already. Does the std exhaust attach to the three stud then with that round plate/flange and a pipe pushed into the hole?

Cheers

One of these ?


3studflange

Something like this will do the job.

slip on adaptor

Wot he said^^^^^^^^^^
Works a trat, I used it to fit a Bandit, (very quiet) can, then cut it to make a stubby(very loud version last year.
Good cheap track can I recon
Rescued attachment IMG_0032s.JPG

Thanks guys. Can probably get that made up in my friendly machine shop and welder at work.

Cheers.

Rich