im looking for drawings plan elevation etc of the hayabusa engin with dimensions

just to start planning my chassis

anyone got or know where i can get drawings?
relentless searches and i havent found any yet

thanks
aitch

Image deleted by owner

Sorry...couldn't resist!

http://www.dpcars.net/home/links.htm

It's at the bottom.

Hope this helps

Kind regards

John

Hijack in progress....
What I do know is that it's a large lump, having had one, but that's of no use to you... what is of use to me would be the dimensions of the ZZR1400 - is it any smaller/narrower?????
The Hayabusa doesn't fit a Jedi, at least not without externally spacing the rear chassis rails (I'm not so keen on that). This means forced induction on the current 1000cc, still under the 1400cc class limit with the penalty. Hence my question - is the ZZR1400 any smaller/narrower, could it (for example) be a possible squeeze into a Jedi?

quote:

---

Originally posted by 3GEComponents
http://www.dpcars.net/home/links.htm

It's at the bottom.

Hope this helps

Kind regards

John

---

Rescued attachment chassis 2 steel 2.jpg

quote:

---

Originally posted by motorcycle_mayhem
Hijack in progress....
What I do know is that it's a large lump, having had one, but that's of no use to you... what is of use to me would be the dimensions of the ZZR1400 - is it any smaller/narrower?????
The Hayabusa doesn't fit a Jedi, at least not without externally spacing the rear chassis rails (I'm not so keen on that). This means forced induction on the current 1000cc, still under the 1400cc class limit with the penalty. Hence my question - is the ZZR1400 any smaller/narrower, could it (for example) be a possible squeeze into a Jedi?

---