IDONTBELEIVEIT
|
| posted on 9/11/08 at 03:33 PM |
|
|
Goin Backwards Without Reverse!!!!
Engine Now Out And Gone Off To Andy B For Dynojetting,Ultrasonic Clean Up,Carb Balancing,New Clutch Plates And Uprated Springs,Strip And Re-Build And
Hopefully A Clean Bill Of Health Accompanied With A Certificate So I Can Register It On A Brandnew 09
Plate .jpg)
Are We There Yet, Are We There Yet!!!!
|
|
|
|
|
Meeerrrk
|
| posted on 9/11/08 at 04:27 PM |
|
|
which engine are you using? R1?
sounds expensive anyway! How come you didnt do it before the engine was fitted?
For Sale : 2008 Aries/Stuart Taylor Motorsport Locoblade (954 Blade)
|
|
|
IDONTBELEIVEIT
|
| posted on 9/11/08 at 05:26 PM |
|
|
1995 893cc Blade 18000 Miles??
Brought Without Hearing It Run,Just Turned It Over To See If It Had Compression.Curiosity Got The Better Of Me And I Wanted To Hear It Run/Drive It
Kids And New Toys
Are We There Yet, Are We There Yet!!!!
|
|
|
designer
|
| posted on 9/11/08 at 07:04 PM |
|
|
Is the fuel filter OK mounted on the glass bulkhead?
|
|
|
Meeerrrk
|
| posted on 9/11/08 at 10:57 PM |
|
|
quote:
Originally posted by IDONTBELEIVEIT
1995 893cc Blade 18000 Miles??
Brought Without Hearing It Run,Just Turned It Over To See If It Had Compression.Curiosity Got The Better Of Me And I Wanted To Hear It Run/Drive It
Kids And New Toys
fairplay to that, i'd do exactly the same
For Sale : 2008 Aries/Stuart Taylor Motorsport Locoblade (954 Blade)
|
|
|
moochofun
|
| posted on 10/11/08 at 04:13 AM |
|
|
quote:
Originally posted by designer
Is the fuel filter OK mounted on the glass bulkhead?
Yep, thats where my one is mounted and I've never had any probs with it. S'pose its down to how you mount it though?
HTH
|
|
|
