johhny5
|
posted on 6/4/10 at 08:28 PM |
|
|
Type 9 gearbox clutch return arm cover
Hi ,
does any one have the plastic cover plate the one that goes on the type 9 box around the clutch arm to stop the crud getting in the clutch.
beer tokens waiting
cheers
John
|
|
|
coozer
|
posted on 6/4/10 at 08:42 PM |
|
|
Never seen one, my donor didnt have one, I don't think they are needed unless your off roading!
1972 V8 Jago
1980 Z750
|
|
Daddylonglegs
|
posted on 6/4/10 at 08:51 PM |
|
|
I'm just going to use a sheet of rubber with a slot cut in it and held on the rim of the hole with a large tie-wrap. We'll see if it works
when I get it on the road (eventually).
Thinking of doing something similar for the handbrake levers on my rear drums 'cos apparently the rubber covers are as rare as rocking horse
poo! which is quite scarce
It looks like the Midget is winning at the moment......
|
|