spdpug98
|
posted on 12/8/10 at 01:43 PM |
|
|
Mileage Correction - 2003 R1 Clocks
Has anyone had their 2003 R1 clocks re-set, I have been meaning to get mine set to the correct mileage for a while
Well today after getting it booked in, I have had a wasted 90 mile round trip after they found out they couldn't do them as they either need a
special connector OR need to remove the LCD screen complete (including all the soldered joints) which will probably break/damage it
So, has anyone actually had theirs done and if so who did you get to do them
My Blog: http://spdpug98.wordpress.com/
|
|
|
Johneturbo
|
posted on 12/8/10 at 02:06 PM |
|
|
i had mine done, i had to send them off thou to guy called kenny decode!
think i have his number somewhere or do a search
|
|
spdpug98
|
posted on 12/8/10 at 02:10 PM |
|
|
quote: Originally posted by Johneturbo
i had mine done, i had to send them off thou to guy called kenny decode!
think i have his number somewhere or do a search
Where they 2003 clocks and how much did it cost (feel free to PM if you want)
My Blog: http://spdpug98.wordpress.com/
|
|
Johneturbo
|
posted on 12/8/10 at 02:12 PM |
|
|
here's the thread http://www.locostbuilders.co.uk/viewthread.php?tid=82423
no mine are 05 clocks, should be the same to reprograme thou
|
|
spdpug98
|
posted on 12/8/10 at 02:15 PM |
|
|
quote:
no mine are 05 clocks, should be the same to reprograme thou
Cheers, the bloke I saw today said he could re-programe them but the chip he needed to get to was under the LCD screen and that was his problem - will
give the bloke you used a call and see what he says
My Blog: http://spdpug98.wordpress.com/
|
|
spdpug98
|
posted on 12/8/10 at 02:23 PM |
|
|
Thanks - Spoken with Kenny 'decode' and will be sending them up to him
My Blog: http://spdpug98.wordpress.com/
|
|
CRAIGR
|
posted on 12/8/10 at 02:25 PM |
|
|
Did he give you a price ??quote: Originally posted by spdpug98
Thanks - Spoken with Kenny 'decode' and will be sending them up to him
|
|
spdpug98
|
posted on 12/8/10 at 02:36 PM |
|
|
quote: Originally posted by CRAIGR
Did he give you a price ??quote: Originally posted by spdpug98
Thanks - Spoken with Kenny 'decode' and will be sending them up to him
Yes........a lot cheaper than the companies down on the South Coast (I'll PM you - just incase he doesn't want it all over a forum)
My Blog: http://spdpug98.wordpress.com/
|
|
Red16
|
posted on 12/8/10 at 06:13 PM |
|
|
where is this kenny decode based?
|
|
spdpug98
|
posted on 12/8/10 at 06:17 PM |
|
|
Manchester
My Blog: http://spdpug98.wordpress.com/
|
|
adithorp
|
posted on 12/8/10 at 08:24 PM |
|
|
Kenny- decode did mine on 06R1. He does loads of radio decodes for me at work and I think I might have originally given john his number.
adrian
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
spdpug98
|
posted on 14/9/10 at 11:01 AM |
|
|
I know a few of you wanted an update on how the mileage correction went with Kenny Decode, all I can say is 'top service from a top
bloke'
He did the clocks the same day as he got them and sent them straight back, arrived the next day
My Blog: http://spdpug98.wordpress.com/
|
|
TQ_uk
|
posted on 15/9/10 at 04:31 PM |
|
|
Alternatively can you use a Speedohealer?
|
|
spdpug98
|
posted on 15/9/10 at 04:42 PM |
|
|
quote: Originally posted by TQ_uk
Alternatively can you use a Speedohealer?
I have a speedohealer but they don't change the mileage readout on the clocks, just the speed registered/indicated
[Edited on 15/9/10 by spdpug98]
My Blog: http://spdpug98.wordpress.com/
|
|