nnrouty
|
posted on 7/9/10 at 10:10 AM |
|
|
Crossflow Sell or Scrap?
Hi all
I have a 1300 crossflow in bits as i stripped it just to find the cylinders where caked up.
So i have got a zetec now, but not sure what to do with the crossflow?
Is it worth anything if sell as parts or will i get more if weigh it in at scrap yard?
Cheers
As long as its fast.... i don't care
|
|
|
StevieB
|
posted on 7/9/10 at 10:40 AM |
|
|
Someone will always have a 1300 crossflow - it's the engine used for the locost chamionship and getting less and less of them around now.
|
|
snapper
|
posted on 7/9/10 at 10:54 AM |
|
|
1300cc pistons in a 1600cc block gives more compression
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
Nash
|
posted on 7/9/10 at 10:58 AM |
|
|
Don't want to hi-jack the thread but what value is a 1300GT x-flow with an A3 cam, 32/36 T/C webber and +90 pistons.
Piccies in my Archieve.
Cheers..... Neil
It's What You Do Next That Counts.
Build It, Buy It, Drive It:
Southern Kit Car Club
|
|