0hooters0
|
posted on 23/3/11 at 07:47 PM |
|
|
R1 cooling
I am rebuilding a striped down mnr vortx with 2000 r1 motor the car came with a new BL 1000cc mini radiator fitted but not tested. It is just plumbed
in top and bottom hose with no header tank' expansion tank' or air bleed will this set up work or do i need to start again any
suggestions would be appreciated .
[Edited on 23/3/11 by 0hooters0]
|
|
|
daniel mason
|
posted on 23/3/11 at 07:52 PM |
|
|
how come your not running a header tank? have you got an expansion tank?
|
|
0hooters0
|
posted on 23/3/11 at 08:03 PM |
|
|
This is how it came when i bought the car most of it came in lots of cardboard boxes .
|
|
KJK
|
posted on 23/3/11 at 08:23 PM |
|
|
i ran my blade powered striker with a mini rad and had no problems.
|
|
blakep82
|
posted on 23/3/11 at 08:43 PM |
|
|
the mini never ran a header tank or expansion bottle, so, it should be fine, but header tank would be better...
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
0hooters0
|
posted on 23/3/11 at 08:44 PM |
|
|
Hi. How is it plumbed in (ie) has it got a header tank? expansion tank?.
[Edited on 23/3/11 by 0hooters0]
|
|