jonno
|
posted on 10/9/11 at 06:51 PM |
|
|
poly bush supplier help
Hi, I need to get some poly bushes for my standard locost trailing arms but not sure what or where to get them... any help please i kinda need them
this week !!
having fun on a budget
|
|
|
big_wasa
|
posted on 10/9/11 at 07:01 PM |
|
|
POLY BUSHES TO FIT SPIT,GT6,VITESSE,HERALD WISHBONES | eBay things can be found on ebay.
just ask for the dims to check.
|
|
jonno
|
posted on 10/9/11 at 07:51 PM |
|
|
Cheers.. i looked for kit car bush, no wonder nothing could be found !!
having fun on a budget
|
|
big_wasa
|
posted on 10/9/11 at 08:04 PM |
|
|
The book was bassed on the metalastic bushes from the above.
Dim's of them would be I/D is 7/8 inches [9mm] The O/D is 7/8 inches [ 20 mm ] The length is 1 7/16 inches [ 35 mm ]
I found when fitting mine I needed longer crush tubes as the top hat shoulders sit out side the wishbone tube. I made by own and did the bore m10.
Reminds me I need a spare
|
|
Chippy
|
posted on 10/9/11 at 10:26 PM |
|
|
Think the I/D should be 7/16". Cheers Ray
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
panichat
|
posted on 11/9/11 at 06:37 AM |
|
|
SuperFlex
Try these:
http://www.superflex.co.uk/categories.php?cat=73
Cheers
Dave
|
|
jonno
|
posted on 16/9/11 at 04:53 PM |
|
|
Not having a lot of luck. Looks like my arms holes are 40mm length x 25mm diameter.
Any more suggestions please, thanks
having fun on a budget
|
|
paulf
|
posted on 18/9/11 at 08:49 PM |
|
|
Have you tried Wisbech engineering ? they have a web site and list poly bushes but don't list sizes i think they supply a lot of kit
manufacturers.
Paul
quote: Originally posted by jonno
Not having a lot of luck. Looks like my arms holes are 40mm length x 25mm diameter.
Any more suggestions please, thanks
|
|