zekill
|
posted on 6/4/13 at 06:03 PM |
|
|
cortina Mk5 donor car
Hi all,
is a Cortina Mk5 is a good donor car for a locost 7 project ?
I can have it complete and cheap.
I know front axle is very good, how about steering rack, axle, engine, gearbox ?
thanks.
Fisher Fury with Phoenix bodywork, Blade 919cc
|
|
|
dave-69isit
|
posted on 6/4/13 at 06:17 PM |
|
|
donor
Its a good. Place to start use most of it
|
|
big_wasa
|
posted on 6/4/13 at 07:16 PM |
|
|
I would think you could sell the Cortina and buy an mx5 and have change left over. But yeh a great donor for a book car. steering rack is a little
wide for a book car but rear axle is fine and you could use most of it.
A local banger racer was made to sell some of his stock, Granada's ect where fetching an easy £500
|
|
Brook_lands
|
posted on 6/4/13 at 11:11 PM |
|
|
Yep I used a MK IV Cortina as my donor. Used front hubs, engine, gearbox, rear axle, steering column, pedal box (with modifications) and master brake
cylinder incl servo. Couldn't get the steering rack to fit without modifications to the chassis so used a modified escort unit, also the
radiator was too big.
|
|
zekill
|
posted on 7/4/13 at 07:23 AM |
|
|
thanks all for advice, I think to buy it.
Fisher Fury with Phoenix bodywork, Blade 919cc
|
|
Julian T
|
posted on 24/4/13 at 07:59 PM |
|
|
I used a Cortina as a donor.
Used front hubs but that was it. Rest is a rel mix.
|
|
zekill
|
posted on 9/5/13 at 06:35 PM |
|
|
I have buy the car, not at home at this time but it's seem to be a MK4 cortina, 1300cc engine.
Fisher Fury with Phoenix bodywork, Blade 919cc
|
|
Not Anumber
|
posted on 17/5/13 at 03:28 PM |
|
|
Are you keeping the 1300 crossflow engine that comes with it or selling this and going for a Zetec or pinto ?
|
|
zekill
|
posted on 17/5/13 at 08:34 PM |
|
|
it's seem to be a 1300cc pinto but i'm not sure, the car isn't at home.
I think going to zetec route.
Fisher Fury with Phoenix bodywork, Blade 919cc
|
|
zekill
|
posted on 29/5/13 at 05:59 PM |
|
|
donor car at home, Cortina Mk4 (named Taunus in France) 1300cc Pinto.
Taunus MK4
Fisher Fury with Phoenix bodywork, Blade 919cc
|
|