Amurrell
|
| posted on 1/2/14 at 07:11 PM |
|
|
Tyre pressures for Robin Hood S7
Does anybody know how you find out what your front and rear tyre pressures should be for ordinary (non racing) use for a Honda Fireblade powered Robin
Hood S7 kit car, please? Thank you, Alan
|
|
|
|
|
whiz
|
| posted on 1/2/14 at 07:37 PM |
|
|
Tyre pressure
Hi I ran my S7 at 20psi I ran a zetec in mine you might get away with 18 psi
Andy
|
|
|
steve m
|
| posted on 1/2/14 at 08:00 PM |
|
|
I run, 16psi in my locost, but believe the Robin Hoods to be heavier so 18-20psi would be a good starting pressure
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
theduck
|
 posted on 1/2/14 at 08:34 PM |
|
|
Fireblade engined S7? Thats a lot of car for a bike engine!
|
|
|
dave r
|
| posted on 1/2/14 at 09:24 PM |
|
|
i run 16psi all round with a duratec 2b
I'd love to give my imaginary friend a great big hug,
but this jacket makes it impossible.
|
|
|
snapper
|
| posted on 2/2/14 at 08:49 AM |
|
|
16 to 18psi
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
