Wes
|
| posted on 24/5/16 at 07:57 PM |
|
|
5VY plumbing??? PLEASE
Hi all,
I'm in the process of trying to plumb my engine R1 5VY engine into my MK indy and having a nightmare. I don't suppose anyone has a drawing
or could sketch me a quick one at all? I'd be very grateful as I've been on it for 4 weeks now and got nowhere.
Many thanks
Wes 07515934136 or wesleykos@hotmail.co.uk
|
|
|
|
|
adithorp
|
| posted on 24/5/16 at 08:34 PM |
|
|
No diagram but from memory...
Thermostat housing to top of rad. Bottom of rad to water pump inlet pipe (steel pipe with drain screw in it). Small pipe near sprocket to throttle
body thermo-valve and other side of that goes to small pipe on head beneath TB's. Outlet from oil cooler T'd into top hose. Expansion
bottle (used VW globe type) lower outlet T'd into bottom hose. Rad' bleed and 'stat bleed T'd together and into top of
expansion bottle.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
Wes
|
| posted on 24/5/16 at 08:40 PM |
|
|
OK thanks for that. I'll have a good look tomorrow and see if I can put all that together. Thank you very much for your reply.
|
|
|
Coopz
|
| posted on 24/5/16 at 09:25 PM |
|
|
This thread should be of use:
http://www.locostbuilders.co.uk/viewthread.php?tid=135068
|
|
|
Coopz
|
| posted on 24/5/16 at 09:28 PM |
|
|
If you're still struggling, message me and I will take some pictures of my install.
Good luck!
|
|
|
