v8james
|
| posted on 8/6/19 at 11:03 AM |
|
|
AN fittings
Need some help with an fitting size.
My fuel rail has 14mm od male threads at both ends, what size of AN would fit, need something like this
|
|
|
|
|
big_wasa
|
| posted on 8/6/19 at 12:20 PM |
|
|
What’s the fuel rail ?
The reason I ask is if it’s a zetec ( silvertop ) as below your avatar it won’t be 14mm.
More likely to be jic 9/16, same as An#6 ( 14.3mm ) but I thought one end was bigger than the other.
You can get the an6 fittings with 5/16 8mm and 3/8 10mm push lock ends.
Or if I am making assumptions and it’s just a plain m14x1.5 thread you can get a m14 to an6 adapter.
[Edited on 8/6/19 by big_wasa]
|
|
|
daviep
|
| posted on 8/6/19 at 12:37 PM |
|
|
Dash 6 (-06)
“A truly great library contains something in it to offend everyone.”
|
|
|
v8james
|
| posted on 8/6/19 at 03:45 PM |
|
|
Thanks.
Its an AT Power fuel rail
|
|
|
big_wasa
|
| posted on 8/6/19 at 04:01 PM |
|
|
They have a female thread and normally come with either a push on fitting or an an6 fitting.
|
|
|
