Board logo

sva coming soon
chris_smith - 22/2/09 at 07:16 PM

ok so sva will be very soon but what did you guys that have gone through it, take with you
im talking the obvious tools etc but are there any tips/items/essentials you guys/gals can recommend for me and others to put in "The SVA Box"

chris


Dangle_kt - 22/2/09 at 07:34 PM

I have read of people fitting last minute trim, so worth taking some of that?

how is your speedo driven? that seems to cause a lot of fails - maybe some spare magnets/some way of removing them?

When is it?


omega 24 v6 - 22/2/09 at 07:40 PM

Just made mines up tonight.
Toolbox
Lappy
Serial cable
foam/trim/nut covers / self amalgam tape /tie wraps/insulating tape /terminals and fuses mixture of in a box.
Folder with all documentation/receipts and dvla sva stuff in it.

Spare can of fuel ( plan to run it up to temp before the guy arrives so will need to refill to full)

Think that's about it.


adithorp - 22/2/09 at 08:00 PM

^That^ is a pretty complete list. I'd just add some spare bulbs and gaffer tape to it. Possibly also a flask of decent coffee and something to eat.

adrian


omega 24 v6 - 22/2/09 at 08:01 PM

quote:

Possibly also a flask of decent coffee and something to eat.



Burger king 100 yards away from my sva point

Bulbs good point I'll look some out.


andrew.carwithen - 22/2/09 at 08:02 PM

I've got my SVA in the morning so have spent the day getting ready. I've probably gone way OTT with the amount I'm taking. One large box contains spare SVA trim, heatshrink, cable sheathing, ties, various nuts and bolts, drill bits, pop-rivets, p-clips etc.
Another box has various handtools, socket set, axle stands, trolley jack plus electric drill, heatgun and powerfile, just in case I'm allowed to remedy any minor fail points on site (though there may be a problem using them as they're not 'PAT-Tested? )
Paperwork includes proof of engine age (haynes manual) and various spec. sheets/receipts/photos which may be relevant.
Just need some way of whiling away the next 9 -10 hours as there's no friggin' way I'm gonna be able to sleep tonight. Avon is loaded on trailer (hopefully!) boxed in enough by tintop to prevent any thieving scrotes attempting to have her away off drive overnight (Ijust know any slight noise and I'll be up at the bedroom window like a jack-in-the-box.

Andy.


chris_smith - 22/2/09 at 08:05 PM

quote:

how is your speedo driven? that seems to cause a lot of fails - maybe some spare magnets/some way of removing them? When is it?



hi dangle, iv not yet got the date but got my pics back yesterday so im expecting a call in next day or so, iv got a cable driven speedo from gearbox hoping its ok but am going to check it next week,
how is your build coming on? you must be close too


adithorp - 22/2/09 at 08:07 PM

..."Burger king 100 yards away from my sva point..."

My piont exactly!

Don't forget your camera; We want pictures!

Enjoy the experience. It's not as bad as some people would have you believe.

adrian


marmot0 - 23/2/09 at 07:21 AM

Take a file, my tester let me file a few rough edges