Board logo

Under Dash Opinions
Dave Bailey - 19/4/09 at 08:40 PM

I fitted my dash today to see what I would need to do for SVA. The attached pictures show what can be seen at the bottom of the dash..... Will this be an issue for SVA / IVA?

Under Dash 3
Under Dash 3

Under Dash 2
Under Dash 2

Under Dash 1
Under Dash 1

Under Dash 4
Under Dash 4

Under Dash 5
Under Dash 5

Andybarbet - 19/4/09 at 09:09 PM

Might be worth making up a couple of ali cover plates to go under there if your worried, im not sure of the rules as i haven't even started building my velocity yet.

Dash looks awesome by the way, didn't know carbon mods did one to fit the velocity's high scuttle - very tasty

coozer - 19/4/09 at 09:14 PM

Get all the sh1t out the way and we can see what your worried about

Dave Bailey - 19/4/09 at 09:17 PM

Thanks .... This is what it looks like with the Race Technology dash fitted...

Dash 2
Dash 2

iiyama - 19/4/09 at 09:17 PM

Wot he said!

Dave Bailey - 19/4/09 at 09:25 PM

I'm hurt now What sh1t? I only have some covers on the seats so that I don't sit on them with tools in my pockets!

serieslandy - 19/4/09 at 09:42 PM

quote:
Originally posted by Dave Bailey
Thanks .... This is what it looks like with the Race Technology dash fitted...
that is pretty much what I was thinking for my dash, very pretty.

andrew-theasby - 19/4/09 at 10:36 PM

I thought they were going to be doing the sharp edges test under there now for the iva? I think its a different sized sphere, but wouldnt be too difficult to cover it in would it?

Valtra - 19/4/09 at 11:17 PM

quote:
Originally posted by Dave Bailey
I'm hurt now What sh1t? I only have some covers on the seats so that I don't sit on them with tools in my pockets!


I think he was talking about the wires and switch plugs hanging down

I sugest you want some pipe lagging foam tie wrapping round the cross chassis rails, looks neat and could save a broken ankle in a shunt also a bit of edge trim here and there will work wonders