I was thinking about making to radius tools (bits of ali with the corners drilled off to get the radius) to go round my car with prior to sva and check everything over.

What radius are there?

I know its 19mm for the dash or 5mm if soft covered and there is a 2.5mm one.

What i really need is the SVA manual, but they seem a bit hard to get hold of.

Thanks

one I didn't know about was the gear stick, has to be at least 3.2mm radius

have a look at this pdf in the back are radius templates

Good link that, Thanks.

Thats brilliant, cheers for that. Is there anything missing from there thats worth knowing?

Thanks