Board logo

Brake res labelling
Nash - 22/10/09 at 06:33 AM

Morning all.
A while ago someone posted a label dealing with IVA requirements for brake resovoirs. You know the yellow label that has to be within 100mm of the resovoir.

I have unsuccessfully searched for the post so does anyone know where I can find it or is a label commercially available?

Thanks in anticipation.

....... Neil

dunk3 - 22/10/09 at 06:46 AM

I went to the scrapyard and got one of a rover 200, i think they are on the 400, and 600, models too.

adrianreeve - 22/10/09 at 07:21 AM

Car builder solutions do one for a pound.

Cheers

Adrian

tomgregory2000 - 22/10/09 at 07:24 AM

here you go
click me stick me

turbodisplay - 22/10/09 at 07:28 AM

I noticed that as well, a simple but very hard to find part.
I have delt with screen printers in order to get a graphic overlay made up.
The cost per unit can be cheap, but tooling can be expensive.

Edit: typing too slow, £1 is very cheap from cbs.

If you know about cars you do not need a sticker, if you don`t a sticker will still be of no use. Especially if you are like my "friend's" sisters boyfriend- if it isn`t enough oil the oil light will come on!!!!
Darren

[Edited on 22/10/09 by turbodisplay]

paul the 6th - 22/10/09 at 11:20 AM

ooh, I didn't know about this requirement... Are there many other "stickery" points on the IVA?

Nash - 22/10/09 at 06:50 PM

quote:
Originally posted by paul the 6th
ooh, I didn't know about this requirement... Are there many other "stickery" points on the IVA?


Section 18. Manufacturer Plate and Vin Chassis plate

Dashboard all switches require to be correctly labelled.

Water Header tank labelled however the yellow screw cap lid is ok for that.

...........Neil