I have now covered my trackrods-trackrod ends with shrouds.

I have covered the nuts with nut covers, but what do i cover the bottom shock-coil.

I have read that it has to be removable with out damaging it.

Also how much else needs covering i will post some pictures this week to see what i have missed.

Thank you.

[Edited on 26/9/10 by Michael]

If you mean the shock adjuster ring I wrapped self amalgamating tape around it

Neatest solution I've seen was tyres fron remote control cars.

Will search ebay or go into our local model shop.

You no longer need to do this, everything is exempt inside the shape formed by imagining a theoretical box around the upper and lower wishbones.

So no longer should people fail on this, it's all in the booooook

Wot he said^^^^^

IVA manual
Exterior projections 16 > figure 5

[Edited on 27-9-10 by 40inches]

Yes i read the book that said its all exempt, but do not know of anyone that has been for the test to make sure its being tested that way.

If so it will save one hell of trouble trying to cover it all.

I will have to cover exhaust mounts, but what do people use to cover exhaust clamps?

Yes by chance I went for an IVA with my mate the day after that ammendment came out, it was lying on top of the testers book.

He hit at the shocks with the ball and said it's a fail but we had to explain to him what the ammendment meant that was lying on his desk, and he passed it on this.