Board logo

Wish me luck
subk2002 - 1/9/04 at 10:07 PM

Well its the big day tomorrow (thursday) .
8am at bishopbriggs

Fingers crossed

Drew


colibriman - 1/9/04 at 10:23 PM

you'll be fine.....

all the best....


stephen_gusterson - 1/9/04 at 10:59 PM

luck wished

atb

steve


Hellfire - 1/9/04 at 11:14 PM

Good Luck - at least the weather should be ok

One more for the road....


Browser - 1/9/04 at 11:46 PM

Good luck. Worse than being an expectant father innit!


scoobyis2cool - 2/9/04 at 01:34 AM

Good luck!

Pete


mangogrooveworkshop - 2/9/04 at 07:48 AM

Good luck.


marktigere1 - 2/9/04 at 11:25 AM

Probably too late but best of luck anyway!!

Cheers

Mark


OX - 2/9/04 at 12:27 PM

good luck


Mk-Ninja - 2/9/04 at 01:29 PM

Yes bit late now but hope it went OK.
Guess you are either getting plates made or in the pub


subk2002 - 2/9/04 at 03:02 PM

IT FAILED

1. Emissions (not much in it)

2. No head lights ,thay must have packed in because thay worked last night.

3. Fuel fillter restrictor missing ( where do i get one ??)

4. Non radiussed nose cone edge at suspension.

5. Brake fluid warning lamp not identifiable.


Not to bad

Drew


dave1888 - 2/9/04 at 03:36 PM

Sorry to hear that mate still not much


Peteff - 2/9/04 at 06:30 PM

The emissions seems like the only one that could be sticky, the others all have easy solutions. Good luck with the next time.


mangogrooveworkshop - 2/9/04 at 11:47 PM

Shit happens. Not that bad could be worse.

PAt:


athoirs - 3/9/04 at 07:04 AM

Drew,

The you can get a fuel restrictor from Europa which fits the Mocal fillers if you have one of them it just clips on the back.

Andy


macspeedy - 3/9/04 at 04:33 PM

what a shame, they are easily ironed out when is your re-test ?


Mark Allanson - 3/9/04 at 06:17 PM

Whats all this fuel restrictor stuff then?


Mark Allanson - 3/9/04 at 08:04 PM

Thank Ron for that, I thought it was something I had missed! I have a Pinto so not applicable!