Hi,

I'm working towards getting my car ready for IVA but have a few things left on the checklist to go. One of those is the radius of the exhaust pipe. I know most of the cans you buy come with a rolled lip, but I acquired my car part built off of someone else with a brand new can without a rolled lip, so where could I get this done? Alternatively, I would like to buy a 90 deg bend stainless pipe that I can get rolled somewhere. Any ideas?

find one of these the right size ;-) get it welded on
eBay Item

Cunning. Not a bad suggestion. I never would have looked at adding a boat tie ring, but it may do the job.

Get in touch with Paul who goes by the member id "907". That's right up his street.

Poundland were selling boy-racer style exhaust trims. Could be used to get thru IVA.

Hi
We used a bike can , a 90 degree elbow , & a straight chrome exhaust trim
Which you can find anywhere.

IVA exhaust with cat
Good luck.
René

quote:

---

Originally posted by renetom
Hi
We used a bike can , a 90 degree elbow , & a straight chrome exhaust trim
Which you can find anywhere.

Good luck.
René

---

Hi
That's the gearshift lever for the reverse box
We have a paddle shift for the gearbox
ours is a bike engine.
rené

Don't forget the decibels.

[Edited on 30/11/12 by renetom]