Hello all, new member on here!!
I have been offered a locost race car, my question is, as it's already built but with no logbook or IVA, is it possible to get it through its
test and put on the road? said car is quite a tatty example anyway and I plan on completely stripping it down and rebuilding it over winter. Do I have
to document the build as I go along?
Help much appreciated!!
Ed
Strip it, then take 100's of photos as you build it back up again. Save all your receipts, get a receipt from whoever you got the car from
detailing all the major parts, that is, not a receipt for a car.
Get creative with Word for any you haven't got
Oh! Welcome to the forum ,
Your first download http://www.dft.gov.uk/vosa/repository/M1%20IVA%20Inspection%20Manual.pdf
[Edited on 6-11-13 by 40inches]
[Edited on 6-11-13 by 40inches]
Thank you for taking the time to reply!!
What significance do the receipts have? The seller was not the original builder, but if he were to provide a piece of paper mentioning the sale of the
engine, gearbox, rear axle, front hubs and steering column is it? I'm not fully understanding the receipts part and what is actually required?
Thanks!!
Ed
quote:
Originally posted by edthedrummer
Thank you for taking the time to reply!!
What significance do the receipts have? The seller was not the original builder, but if he were to provide a piece of paper mentioning the sale of the engine, gearbox, rear axle, front hubs and steering column is it? I'm not fully understanding the receipts part and what is actually required?
Thanks!!
Ed
Ahhh I see. It's just a case of pleasing the 'man'. So with regards to the receipts, would one for all the parts be sufficient? or
individual? What about the age of the parts, does this need mentioning at all?
I assume the chassis doesn't need a receipt as it's a home built locost?
One receipt listing all the parts is what I had, plus loads for nuts bolts ect, get him to put "Locost Chassis" on the receipt
Thanks for your help!!
Big decision to make now!! It's mighty tempting, but quite a daunting challenge!!
Hi Ed.
What engine have you got there as you will need to know what emissions rules apply.
Spend some time browsing through this forum for information relating to the IVA, particularly with regard to radius edges, switchgear, lights etc.
The more you research it on here the more you can learn from other people's experiences.
Hi Ed!!
It'll be a 1300 x-flow currently but depending if I decide to compete with it or not I might change. Is it just the year of engine that concerns
the emissions?
Hello Owelly!! It's been a few years?!