Board logo

Hazard tell tales
neilp1 - 20/5/14 at 08:13 AM

I have a digidash 2 which has a tell tale for indicators/hazards, but it only works with the ignition on. With hazards on with ignition off I have no tell tales. Will this fail the IVA??

Smoking Frog - 20/5/14 at 09:13 AM

quote:

Will this fail the IVA??


Yes, I believe so.

loggyboy - 20/5/14 at 11:07 AM

Can you see your indcators from the drivers seat?
If so you can apply note 1 of section 23:

Note 1: A tell tale is not required if the front indicators are directly clearly visible to the driver.

tims31 - 20/5/14 at 11:09 AM

Do that hazards work and does the switch light when they are on, if so I'm not sure you need the tell tales on but thats not to say it won't fail IVA.

I assume the digidash is wired to come on with the ignition switched on, is there no separate power wire for the indicators

neilp1 - 20/5/14 at 12:06 PM

I can see the side repeaters from the drivers seat but not the front.
The switch lights up when the side/dipped lights are switch on.

rdodger - 20/5/14 at 04:39 PM

I have a digidash and passed IVA by making my hazard switch (Savage) flash with the hazards. My Savage switches light half bright with the lights and full when in use.